Penguin and proptec rotary atomizers

Penguin Builder | Motors | Injector Plate | Hub | Basket | Electric Cord | Voltage | Variable & High Speed | connecting cord

Penguin Atomizer Builder: Choose electrical connection length.

picture indicating the electrical cord on a PENGUIN PRO atomizer

All Penguin™ and Penguin Pro™ atomizers come standard with 20' of SOOW grade connector wire to connect either the atomizer or the Variable speed drive to the powersource. See arrow above left. A plug is not included. This is a premium grade, wet/exterior duty, toolcord type wire. if you want a longer piece of wire, you may specify it here. For cords longer than 100', call.

 

CALLOUT DESCRIPTION Add to quote sheet/buy it
XX specify length of cord in feet. 20' standard, 100' maximum. Actual cord will vary with motor type (1 or 3 Phase, 110/220/440V)  

 

Back to PENGUIN ATOMIZER BUILDER

NEXT choice: Choose VOLTAGE

does your spraying solution measure up?

 

A few benefits rotary atomizers bring to your process:


Thick and Gooey is no problem for a rotary atomizer

Spray anything- thinner

than water to thick & chunky. If it can be pumped, it can be sprayed.

 

no need to fear clogs with a rotary atomizer

Non-clogging, non-liming.

centripetal force keeps the atomizer clean.

 

small shifts in droplet size with large shifts in flow

Consistent droplet size

over wide flow range.

Spray the rate you want with confidence, no nozzles to change.

 

Built tough- made in michigan

Long wearing and durable, made in Michigan!

Thousands of hours of trouble-free operation in your toughest application environments.

 

Contact Ledebuhr industries for more information- we're here to help!


another high performance product group manufactured by:


Ledebuhr Industries

Offices: 101 Innovation Parkway
Williamston, MI 48895 USA

Physical Plant:
795 Progress Court, Williamston, MI 48895 USA

Toll-Free: (866) 641-4671
Phone: (517) 641-4671
Fax: (888) 636-8635
info@ledebuhr.net